Solder Ball Pick & Place Machine

Product functions:

Automatically take and place 0.5mm diameter tin ball

Product features:

Automatic reclaiming through z-axis module; Position the camera to locate the acupoint of the vehicle, and at the same time, lower the CCD component flying racket to locate the position of the tin ball on the suction head. The two are combined to automatically align to ensure accurate installation; After the fitting is completed, recheck the CCD to detect the fitting effect to ensure the product yield. The suction head is cleaned regularly to reduce loss and prolong service life.

Machine size: 1350 (L) * 1400 (W) * 1700 (H) mm

Operating height: 900mm

Capacity (UPH): > 1050pcs / h

Yield: 99.5%

Input voltage: AC 220V 50 / 60Hz

Rated power: 3kw

Equipment air pressure: 0.6MPa